c-shaped acrylic side table
We manufacture c-shaped acrylic side tables for importers, wholesalers and furniture brands, using approved profiles and production plans to support consistent bulk orders.
Quick specifications
| Product Scope | Complete C-shaped acrylic side tables with a top, open-side profile, support and foot; choose one-piece, connected, two-tier or rolling construction from your approved drawing or sample. |
|---|---|
| MOQ | 50–200-piece MOQs |
| Sample Timing | JFM offers 3–7-day sample production. |
| Production Lead Time | We publish 10–35-day bulk production schedules. The exact time will depend on the order quantity and the complexity of the product. |
| Size, Thickness and Load | We provide 5–100 mm acrylic processing for furniture. |
| Material and Finish | 92% light-transmission cast acrylic, available in clear, smoked grey, tea, milky white, gradient, frosted, and custom-tinted finishes. |
| Assembly and Packing | Furniture packs use a PE bag, foam separation, foam board, wooden case, and pallet. JFM records the assembly state and carton plan by SKU. |
| Shipping Terms | We supply protective packing and arrange EXW, FOB, DDU, or DDP delivery. The confirmed quotation and order record the shipping term, destination, packing scope, and planned dispatch schedule. |
Complete C-shaped table supply
A c-shaped acrylic side table is a complete furniture piece with a top, open-side support and foot. Importers, wholesalers and brands can source one-piece bent, connected, two-tier, rolling, round-top, compact or tinted versions as a planned collection. The commercial risk is not the label but whether opening clearance, foot projection, visible finish and supplied components remain aligned with the version your team approved. We develop from your drawing or reference, agree the construction and selling unit, then set a sample and practical inspection points for production. Assembly state, accessories and carton identity are defined by version so receiving and repeat purchasing use the same specification.
Our Products
One-Piece C-Shaped Acrylic Side Tables
The formed top, side and foot make one continuous table. Approve its bend, open-side clearance and exposed edges on a complete sample.
Two-Tier C-Shaped Acrylic Side Tables
An added shelf changes the complete selling unit. Confirm its connection, usable opening, supplied fasteners and assembled or knock-down pack.
Rolling C-Shaped Acrylic Side Tables
Caster-equipped tables need a defined wheel set, fitting locations, assembly state and labeled accessory pack matched to each SKU.
Round-Top C-Shaped Acrylic Side Tables
A round top changes the visible outline of a c-shaped acrylic side table while its open side and foot remain defined. Approve the top connection and protective pack together.
Compact C-Shaped Acrylic Side Tables
A smaller complete table can serve a distinct range size. Confirm top area, overall height, opening and foot projection for that exact version.
Tinted C-Shaped Acrylic Side Tables
A tinted finish gives the complete c-shaped acrylic side table a different appearance. Sign off color against a physical sample across top, support and foot.
Customization Range
Overall Size and Opening
Set top width and depth, overall height, open-side clearance and foot projection against the complete C-shaped table drawing.
Acrylic Material and Color
Identify grade, thickness and clear or tinted reference by part; list any metal hardware separately in the finished supply scope.
Construction and Tier Count
Choose one-piece forming or connected components, and state whether a lower shelf belongs to that selling unit.
Surface Treatment
Approve the visible faces, color consistency and finish on a complete sample, not from an isolated acrylic sheet.
Edge and Corner Finish
Specify polished, radiused or chamfered top, support and foot edges that your range and pack can repeat.
Branding and Personalization
Place logo, SKU, color and version information where the customer and receiving team can identify the right product.
Hardware and Assembly
For connected or rolling designs, define fasteners, casters, instructions and a trial-assembly route by version.
Packaging and Presentation
Choose assembled or knock-down packing and identify contact protection, accessory containment and carton labels for the distribution route.
Feature Box
Consistent Profile from Sample to Bulk
The open side, top height and foot projection determine whether a c-shaped acrylic side table matches the approved design. We carry those points into the drawing, sample and first-piece checks, alongside visible edges and any shelf or caster fit. Your quality team can compare finished units with one signed-off version when receiving or reordering.
Reliable Production and Delivery Planning
A c-shaped acrylic side table follows a different route when bent from one piece than when assembled from separate parts. We schedule material, forming or machining, assembly, inspection and packing around the approved build and order size. Changes to color, casters, tiers or carton state are reviewed against that plan before release, giving purchasing clear launch and replenishment checkpoints.
Competitive Factory Pricing
Direct factory production lets us price the whole c-shaped acrylic side table. We compare material use, workable part nesting, one-piece versus connected construction, finish labor, hardware, assembly state and carton size against the approved design. Quantity by version and a retained drawing and pack specification can reduce repeat setup work for a distributor’s reorder.
Manufacturing Process
Electronic Saw Cutting
We cut top, support, foot and shelf blanks to the released part list, keeping each construction version separate.
Cutting and CNC Machining
Profiles, openings and connection points follow the approved file so a connected table can assemble as specified.
Edge Polishing and Forming
Exposed top and foot edges are finished against the sample reference before parts move to forming or assembly.
Printing and Engraving
Logo or part identification follows the approved artwork and location without confusing the visible table finish.
Hot bending
For one-piece forms, we heat the specified acrylic evenly, shape it on a dedicated jig, cool it in the jig and check the final opening and profile.
Bonding
Where a version uses separate components, controlled fixtures hold the joint positions while they set; the result is not called a seamless one-piece bend.
Quality Inspection
We compare top, opening, foot, visible finish and version-specific accessories with the approved complete-table reference.
Protective Packing
We separate visible acrylic faces, restrain parts and keep hardware and carton identity matched to each selling unit.
Application
United Kingdom Importer — August 2022: Opening Geometry Kept to One Approved Fit
Project: A United Kingdom furniture importer ordered one-piece C-shaped acrylic side tables in August 2022. The approved design had a 570 mm clear opening and a 280 mm inward foot projection.
Client’s Concern: If the formed opening or foot changed in bulk, the tables might no longer fit as sampled. That would leave the importer with stock it could not sell for the intended use.
Solution: We fixed the opening and foot dimensions on the complete-table drawing, formed each piece in a dedicated jig, cooled it there, and checked those points against the approved sample.
Result: The completed batch retained the 570 mm opening and 280 mm foot profile. The importer received the table shape it had approved rather than a different bulk-production fit.
C-Table Joints Matched the Sample Across the Batch — Furniture Brand, Germany, April 2023
Project: In April 2023, a German furniture brand ordered connected C-shaped acrylic side tables with a clear top, separate support and foot, and polished 15 mm edges.
Client’s Concern: A shifted support or uneven edge would stand out beside the design sample and could leave the brand sorting or rejecting visible stock.
Solution: JFM fixed the edge profile and 5 mm support inset on a complete assembled sample, used those joint positions during production and protected the exposed faces in packing.
Result: The visible inset and polished edges matched the sample, and the brand accepted the batch without joint-related rejection.
Rolling C-Table Kits Arrived with All Four Casters — Furniture Wholesaler, United States, June 2023
Project: In June 2023, a United States furniture wholesaler ordered rolling C-shaped acrylic side tables, each with a clear body and four 40 mm casters.
Client’s Concern: A carton could look complete while wheels or fittings were missing, leaving the unit unsellable until replacement parts arrived.
Solution: JFM used one component list for the top, support, foot and four casters. We counted and bagged the wheels away from the clear faces, then paired that bag and the instructions with the table carton.
Result: The received rolling-table kits each contained four casters and fittings, and the wholesaler accepted them without missing-wheel claims.
Bulk Production Process
1. Inquiry & Quotation
Consult customer service to confirm product specifications, craftsmanship, and quantity, then finalize the quotation and lead time.
2. Solution Confirmation
Formulate the solution, design the drawings, and confirm the final version.
3. Sample Production
The factory designs and produces samples, then sends them to the buyer for confirmation.
4. Mass Production
The factory starts mass production in accordance with the confirmed samples. No modifications are allowed during production.
5.Products Shipment
Once production is completed, safe shipment will be arranged after the balance payment is settled.
Packing Facts
Packaging materials
Outer packaging materials：Corrugated Boxes, Honeycomb Boards, Custom Gift Boxes, Wooden box; Cushioning materials:cushioning materials, Air Pillows, EPE, Honeycomb Paper, Kraft Paper Fillers; Sealing and securing materials:BOPP Transparent Tape, Kraft paper tape, Custom Printed Tape, Stretch Film; Special protective materials:Desiccant, Anti-Static Bags……
Surface and Edge Protection
A published acrylic-furniture pack uses PE film or bag, pearl-cotton or bubble separation, foam board, wooden case, and pallet to stop surface contact.
Sets and Carton Identification
Nesting sizes remain separate SKUs. Carton labels list each size, color, pieces per set, quantity, destination, store, room, or project zone.
FAQ
Choose a complete table by its intended top shape, open side, foot position, and the way it is built. A one-piece bent version gives a continuous profile; a connected, two-tier, or rolling version adds components that need their own approval. For each style, settle the sales unit and assembly state before comparing samples. That keeps unlike constructions from being priced or listed as if they were identical.
Show overall width, depth, and height, plus usable top size, open-side clearance, and how far the foot projects. If the table has a lower tier or casters, identify the usable clearance and overall height for that exact version. These measurements help your retailer or customer recognize the complete product and reduce avoidable fit questions. Confirm the final listing dimensions against the approved production sample.
Ask each factory to price the same drawing or approved reference, material and finish, bend or joint construction, hardware, assembly state, carton plan, and quantity by SKU. A two-tier or rolling table is not directly comparable with a one-piece version. State the destination and trade term as well. You can then compare the actual production and packing scope, not just a unit price for different products.
Plan around a 50–200-piece MOQ, with the exact level confirmed for your design, color, hardware, packing method, and quantities by SKU. Sample production is generally 3–7 days once the drawing or reference, required specifications, and commercial details are complete and confirmed. If your range includes several constructions, request a sample plan for each selling unit before approving the bulk order.
Approve the complete sample against a drawing that identifies the top, opening, foot projection, material color, edge finish, and any bends or joints. Use those same points when checking first pieces and finished units. If a component or process changes, review its effect on the visible profile and fit before accepting the revised version. This gives your receiving team a concrete comparison standard for the bulk shipment.
Choose the assembly state for each construction, rather than for the whole range. A one-piece bent table may ship as one unit, while a connected or rolling design can require separate hardware or casters. Confirm the assembly route during sampling and approve the carton configuration. Your receiving team should be able to match every tabletop, support, foot, and accessory pack to the correct SKU and assembly instructions.
Use the 10–35-day bulk production range as a planning window, with the exact schedule confirmed after your sample, quantity by SKU, materials, hardware, packing state, and order terms are approved. Agree on when changes to the drawing or accessory list stop, then align carton identification and dispatch milestones with your warehouse or launch plan. The order confirmation should record the agreed production window and destination handoff.
Keep the approved drawing and sample record, material and finish, opening and foot dimensions, construction method, hardware list, assembly state, and carton identification for each SKU. On a repeat order, name the previous version and list every requested change. If you alter the profile, joint, caster, or pack, approve the affected first piece before release. This helps your distributor replenish a consistent selling unit.
Request a Quote for Your Side Table Project
Product Specification
Send your company details, drawing or reference, dimensions, color, intended use, quantity for each design, and destination.
Destination and Timing
Add the preferred packing method, target arrival date, and whether the order is for wholesale, private label, or an interior project.
Commercial Context
We can then review the sample and bulk quotation on the right basis.