Custom Acrylic Console Tables
Share your drawing or floor plan and explain where the console will sit, what it will hold, and how it will be delivered. We turn that brief into an approved acrylic console table specification covering dimensions, base structure, wall clearances, material interfaces, sample review, packing, and controlled production.
- You receive a buildable console-table specification aligned with the wall, passage, baseboard, outlets, move-in route, intended objects, and approved product version.
- We review the top, span, supports, joints, floor contact, mixed-material interfaces, assembly, and long-part packing as one SKU.
- If formal performance evidence is required, a professional third-party laboratory tests the released console configuration against the agreed project brief.
Quick specifications
| Item | Details |
|---|---|
| Product Scope | JFM manufactures waterfall, trestle-base, cross-base, pedestal-base, and four-leg acrylic console tables from drawings, floor plans, reference samples, or specified dimensions for furniture brands, importers, wholesalers, hospitality buyers, and interior projects. |
| MOQ | Order quantities typically start at 50–200 pieces, subject to the confirmed design and packing plan. |
| Sample Timing | Sample production is typically scheduled for 3–7 days after the specification is confirmed. |
| Production Lead Time | Bulk production is typically scheduled for 10–35 days. Final timing depends on order quantity, construction, finish, mixed materials, packing, and approval status. |
| Size, Thickness and Load | JFM processes acrylic from 5 to 100 mm for furniture components. The released model defines each thickness, support layout, use map, and acceptance method. |
| Material and Finish | A supported clear cast acrylic material reference may state up to 92% light transmission. That figure does not apply to smoked, tea, milky, gradient, frosted, pink, printed, or custom-tinted finishes, which require separate specifications. |
| Assembly and Packing | Furniture packs may use a PE bag, foam separation, foam board, a wooden case, and a pallet. We record the assembly state and carton plan for each SKU. |
| Shipping Terms | We can arrange EXW, FOB, DDU, or DDP delivery. The contract records the agreed schedule, supported by the confirmed production and packing plan. |
Develop a Console Table for the Actual Wall and Supply Program
As an acrylic console table manufacturer, JFM develops custom and wholesale acrylic console tables for furniture brands, importers, hospitality procurement, A&D teams, and contract projects. Start with a drawing, reference, floor plan, or wall elevation. We review width, depth, height, usable top area, support span, base positions, joints, baseboard and outlet clearance, floor contact, mixed-material interfaces, assembly, and long-part packing as one product. Waterfall, Trestle-Base, Cross-Base, Pedestal-Base, and Four-Leg define the structural categories. Clear acrylic console table describes transparency, small acrylic console table describes size, and pink acrylic console table describes color; none is a category card. Lucite console table, Plexiglass console table, and Perspex console table are same-page material terms. Coffee, Side/End, Dining, C Table, Desk, Shelf, and Display Stand remain separate product families.
Our Products
Waterfall Acrylic Console Tables
A continuous bent acrylic sheet forms the top and side supports. We control width, depth, height, bend radius, usable span, side parallelism, floor contact, and fully assembled protection.
Trestle-Base Acrylic Console Tables
An independent top rests on two end supports joined by a stretcher or frame. We define support spacing, cross-member connections, the tabletop interface, knock-down hardware, and assembly order.
Cross-Base Acrylic Console Tables
Crossed or X-shaped supports form the base. We control the crossing joint, symmetry, support positions, tabletop connections, lateral alignment, floor contact, and component identification.
Pedestal-Base Acrylic Console Tables
One or two acrylic pedestals support the top. We define base width, spacing, overhang, support centerlines, top connections, rear clearance, assembly sequence, and pack orientation.
Four-Leg Acrylic Console Tables
Four separate acrylic legs support the tabletop. We specify leg section, inset, hole positions, brackets or inserts, glides, assembly sequence, and spare-hardware codes.
Customization Range
Console Table Size and Overall Size
We convert your drawing, floor plan, and wall elevation into released overall dimensions, usable top area, support positions, baseboard and outlet clearance, passage limits, move-in route, and packed dimensions.
Acrylic Material Type
For every component, we record the specified acrylic grade, thickness or section, transparency, color, surface direction, protective film, and approved physical reference.
Console Table Structure and Use
Each console structure is developed around the intended objects, load positions, wall relationship, floor condition, mixed materials, and project-specific acceptance points.
Surface Treatment
Approve clear, smoked, tinted, pink, frosted, printed, engraved, or custom-color surfaces against the agreed material sample, finish reference, inspection lighting, and viewing distance.
Edge and Corner Finish
Exposed, hand-contact, tabletop, formed, and joined edges are finished to the released profile, corner radius, polish level, and approved visual reference.
Branding and Personalization
Apply approved logos, product marks, care labels, barcodes, private-label artwork, property identifiers, and destination marks in controlled positions.
Hardware and Assembly
The bill of materials records inserts, fasteners, backing plates, washers, glides, tabletop connectors, cable openings, hardware packs, instructions, spare parts, and the released assembly state.
Packaging and Presentation
We compare assembled and knock-down packs using the actual geometry, surface separation, long-part support, mixed-material isolation, component restraint, hardware identification, instructions, carton limits, and destination labels.
Feature Box
We Fit the Console to the Wall and Passage
Share a drawing, floor plan, reference, or site photographs together with the intended placement. We map the finished width, depth, height, usable top, baseboard, wall panels, outlets, switches, door swings, passage, floor, and move-in route. Those decisions move into the released drawing and sample, giving design, purchasing, and project teams one dimensional reference. Recording the wall relationship early helps installers avoid unplanned cutting, outlet conflicts, blocked circulation, and last-minute furniture repositioning.
We Build the Top, Base, and Interfaces as One Product
We review the console as a complete configuration, not as separate acrylic parts. The tabletop, effective span, support spacing, base depth, joints, mixed-material contact, glides, floor condition, cable openings, assembly, and intended object positions must work together. The production drawing, bill of materials, interface details, sample, and acceptance points remain tied to the same SKU. If formal evidence is requested, a professional third-party laboratory evaluates the released model against the agreed test brief; factory checks remain internal production controls.
We Trial-Pack Long Clear Parts Before Release
Long tops, tall supports, mixed materials, and exposed polished edges need a pack tied to the released assembly state. We trial protective film, separators, edge protection, long-part support, component restraint, hardware bags, carton orientation, and destination labels with the actual parts. Your team can compare assembled and knock-down packs against the same component list and carton plan. The selected pack remains linked to the SKU and packing record, helping receiving teams identify complete sets while keeping hard components away from clear surfaces.
Manufacturing Process
Electronic Saw Cutting
We cut tops, side supports, end frames, legs, pedestals, stretchers, fixtures, and packing blanks to the released production dimensions.
Cutting and CNC Machining
Approved production files control profiles, holes, slots, cable openings, inserts, tabletop connections, knock-down hardware positions, and checking references.
Edge Polishing and Forming
We grind, polish, and form exposed, hand-contact, tabletop, formed, and joined edges to the released profile and finish reference.
Printing and Engraving
Approved artwork controls logos, care labels, barcodes, model marks, property codes, destination identifiers, color, reading direction, and position.
Hot bending
Waterfall sides, returns, curved supports, and formed components follow the approved angle, bend radius, direction, height, and checking fixture.
Bonding
Fixtures hold tops, legs, panels, supports, pedestals, stretchers, and mixed-material interfaces in alignment while the approved joining process sets.
Quality Inspection
We inspect overall dimensions, diagonals, surfaces, edges, bends, joints, support positions, floor contact, rear clearance, hardware, assembly, SKU identity, and the released acceptance record.
Protective Packing
The approved pack retains protective film where specified and adds separators, edge protection, long-part support, mixed-material isolation, component restraint, labels, cartons, cases, or pallets.
Application
Canada Furniture Importer Project — November 2024
Project: In November 2024, JFM completed a knock-down trestle-base acrylic console for a Canadian furniture importer’s entryway range. Challenge: The 1,400 × 350 × 760 mm table had to clear a 20 mm baseboard, pack as long flat components, and assemble without site drilling. Solution: We used a 20 mm clear acrylic top, two 740 mm-high end frames cut from 25 mm acrylic, and a 1,015 × 80 × 20 mm stretcher. Eight M8 bolts passed through Ø9 mm clearance holes with stainless backing plates and nylon washers. The rear support edges sat 30 mm forward of the tabletop edge. Result: Trial assembly recorded height within ±2 mm, diagonal difference within 2 mm, rear clearance at 30 ± 1.5 mm, and alignment across all eight connections. The top, frames, stretcher, and labeled hardware packed as one knock-down SKU.
Netherlands Hotel FF&E Project — December 2025
Project: In December 2025, JFM completed a double-pedestal console for a Netherlands hotel FF&E procurement company for a lobby wall with a concealed data-cable route. Challenge: The 1,600 × 400 × 800 mm table had to remain furniture first, clear a wall outlet, and pass one 54 × 24 mm connector without adding electrical parts. Solution: We built a 20 mm acrylic top and two 260 × 320 × 780 mm hollow pedestals from 15 mm panels. A 60 × 30 mm polished slot entered the right pedestal and exited through a 70 × 35 mm rear service opening. Eight M8 connections used Ø9 mm holes, backing plates, and nylon washers. Result: The sample recorded height within ±2 mm, slot position within 1 mm, 3 mm connector clearance on each side, a 45 mm wall service gap, and complete three-part knock-down assembly from the labeled pack.
United States Private-Label Furniture Project — April 2026
Project: In April 2026, JFM completed a cross-base console with two wood-top finish SKUs for a United States private-label furniture brand. Challenge: Both finishes had to share the same clear acrylic bases and hardware so replenishment would not create incompatible parts. Solution: We released a 1,524 × 356 × 762 mm table with an 18 mm veneered wood top and two 25 mm acrylic X-shaped end frames, each 744 mm high and 300 mm deep. Support centerlines sat 254 mm from the ends. Eight M6 bolts passed through Ø7 mm acrylic clearance holes into threaded inserts in the top rails, with nylon washers isolating the surfaces. Result: Trial assembly held support positions within 1.5 mm, left-to-right top overhang within 2 mm, and full interchange across all eight connections. Separate finish codes, top cartons, base packs, hardware bags, and packing lists preserved both SKUs.
Bulk Production Process
1. Inquiry & Quotation
Share the design, quantity, finish, destination, and commercial context so we can confirm scope, quotation, and an indicative schedule.
2. Solution Confirmation
We convert the agreed brief into drawings, component specifications, approval points, and a controlled production version.
3. Sample Production
The factory produces a sample against the released files and sends it for buyer review and documented approval.
4. Mass Production
Bulk production follows the approved sample and released records. Any requested change enters formal review before the production version is updated.
5.Products Shipment
After final inspection and packing release, shipment is scheduled against the agreed payment milestone and delivery plan.
Packing Facts
Packaging materials
Outer packaging materials：Corrugated Boxes, Honeycomb Boards, Custom Gift Boxes, Wooden box; Cushioning materials:cushioning materials, Air Pillows, EPE, Honeycomb Paper, Kraft Paper Fillers; Sealing and securing materials:BOPP Transparent Tape, Kraft paper tape, Custom Printed Tape, Stretch Film; Special protective materials:Desiccant, Anti-Static Bags……
Surface and Edge Protection
A published acrylic-furniture pack uses PE film or bag, pearl-cotton or bubble separation, foam board, wooden case, and pallet to stop surface contact.
Sets and Carton Identification
Nesting sizes remain separate SKUs. Carton labels list each size, color, pieces per set, quantity, destination, store, room, or project zone.
FAQ
Start with the way the table will actually be used. Note what guests may place on it, how often staff will move it, and whether it stands on carpet or hard flooring. Ask for stability and load information for the exact design, because sheet thickness alone does not answer those questions. Place the sample in a real or mock-up room and let the operations team use it before approving wider installation.
Show the relationship between the table and the seating, not just a list of overall dimensions. Include the tabletop height beside the armrest, the usable surface, and the floor space required. For a C-shaped model, add the clearance beneath the sofa and the reach over the seat. Photographs beside realistically sized furniture and a short measuring guide help customers rule out a poor fit before ordering.
Provide care instructions that match the actual acrylic and finish. Standard uncoated acrylic is usually cleaned with a soft damp cloth, mild soap, and lukewarm water. Dry rubbing, abrasive pads, and unapproved glass cleaners or solvents can damage the surface. Confirm cleaner compatibility when a hotel or commercial team uses disinfectants. Put the same guidance in the carton and the online listing so staff and customers receive one clear routine.
Add storage when there is a clear item that guests or customers need to keep within reach. Test the shelf or drawer with those items and check access from a seated position. On clear acrylic furniture, stored objects remain visible and can quickly look untidy. Compare a furnished storage sample with an open version before extending the range. The useful option should solve a real need without weakening the clean appearance buyers expect.
Use wheels when staff genuinely need to change a layout or move a shared occasional table. Test rolling effort, noise, floor protection, and the locks on the actual flooring, including rug transitions. Check stability with the intended items in place and decide whether the table must be unloaded before moving. If it will stay beside one chair, fixed feet may be simpler and leave fewer parts for the operations team to maintain.
Check the specific record players the table is meant to hold. Their feet, open dust covers, plugs, cable routes, and operating weight can change the usable space. Ask for suitable load information for the proposed table and test playback where normal foot traffic might cause movement. If the design also stores records, assess that weight separately. Publish the verified dimensions and limits so buyers can judge compatibility before purchase.
Begin with a few designs that do different jobs, such as a sofa table, a bedside option, and a storage model. Use sales history or retailer feedback to set the first mix. Test new colors and shapes in smaller quantities before expanding them. Review sell-through, returns, and margin by SKU instead of using total collection sales alone. Replenish proven designs and keep experimental variants at a level the channel can realistically support.
Look at the finished piece in the same conditions your customer will see. Check its proportions beside seating, the edge finish, visible joints, reflections, and the feel of common contact points. Photograph the sample under normal showroom and product-photography lighting. Then compare it with alternatives at the intended selling price. A premium position needs a convincing product experience and presentation; higher material cost on its own is not enough.
Request a Quote for Your Side Table Project
Product Specification
Send your company details, drawing or reference, dimensions, color, intended use, quantity for each design, and destination. For acrylic nesting side tables, include the number of sets and pieces per set.
Destination and Timing
Add the preferred packing method, target arrival date, and whether the order is for wholesale, private label, or an interior project.
Commercial Context
We can then review the sample and bulk quotation on the right basis.